Plant-based industrial cleaning, with the waste under control

UMP SafeCare develops and markets plant-based cleaners and solvents for rail, marine, aerospace and industrial operators who need cleaning performance and simpler waste management.

Request informationView products

Product safety is not waste safety

A product can be labelled non-hazardous in its container and, once mixed with the paint or contaminant removed, produce a waste that must be managed as hazardous. That cost falls on the customer or the contractor. SafeCare Graffiti has been tested at exactly that point: the waste generated by the cleaning.

Conventional cleaner

Product in the containerMay be non-hazardous
Waste after cleaningMay be classified as hazardous
Waste managementHazardous waste fees and paperwork

SafeCare Graffiti

Product in the containerRenewable plant origin
Waste after cleaningNon-hazardous, certified by an ENAC-accredited laboratory
Waste managementLower administrative and cost burden

Waste classification depends on the specific contaminant removed and on the applicable regulations. Request the laboratory report to see the test conditions.

Products

Five products under the UMP SafeCare brand. Performance depends on each application: we recommend a pilot test before full implementation.

SafeCare Graffiti Tar & Gum

Plant-based solvent for removing graffiti, tar, chewing gum and permanent ink.

Non-toxic, non-reactive, non-carcinogenic and safe in use, storage and disposal.

  • Leave to act for 5 to 10 minutes
  • Waste generated certified non-hazardous by an ENAC-accredited laboratory
  • Test first on a hidden area: may damage some acrylic paints

Not water-miscible. pH 6.9. Flash point: 65.5 °C.

Certifications and references: ENAC nº 305 – LE 1322 / LE 1323 · Renfe M23452849 · OSHA 29-CFR 1910.1200 · USEPA 600 / 601 / 602 · GSA SIN 375-362 / 375-363

Request data sheet

SafeCare 1000

Multipurpose concentrated aqueous cleaner with non-ionic surfactants and plant-derived esters. Works as a hydrocarbon separator.

Non-toxic, non-reactive, non-carcinogenic and safe in use, storage and disposal.

  • Concrete floors, equipment and soil; decontamination of hydrocarbon-affected soil
  • Support in wastewater plants and bilges; aerospace and marine
  • Not classified as hazardous (CLP) · VOC < 1 g/L · readily biodegradable (OECD 301B)

Water-miscible. pH 10.2–10.5. Dilution: 100–20% / 20–5% / 5–0.5%.

Certifications and references: CEFAS 25334 (Gold) · NSF 046649 · OSHA · USEPA 600 / 601 / 602 / DfE / NCP · GSA SIN 375-361 / 375-363 · USDA A1 / L1 · SCAQMD

Request data sheet

SafeCare Enhanced Degreaser

Concentrated degreaser for dust-laden oils, fuels and lubricants.

Non-toxic, non-reactive, non-carcinogenic and safe in use, storage and disposal.

  • Suitable for ferrous metals, rubber hoses and gaskets
  • Use neat or diluted; more effective with heat, contact time or agitation
  • Rinse with water

Water-miscible. pH 10.2–11.2. Dilution: 100–50% / 50–20% / 20–5%.

Certifications and references: OSHA · USEPA 600 / 601 / 602 · USDA BioPreferred

Request data sheet

SafeCare Aircraft & Metal Cleaner

Concentrated cleaner for aluminium, light metals and non-ferrous surfaces.

Non-toxic, non-reactive, non-carcinogenic and safe in use, storage and disposal.

  • Removes oils, fuel oils, JA and JP fuels, lubricants and cutting fluids
  • Non-flammable, non-corrosive, with dielectric and antioxidant properties
  • Spray, wipe, immersion, washing machine or pressure washer

Water-miscible. pH 8.4–8.6. Dilution: 100–40% / 20–10% / 10–2.5%.

Certifications and references: MIL-PRF-87937D Type IV · MIL-PRF-85570C Type II · Boeing D6-17487 Rev. N · Douglas CSD-1 · MIL-C-87936A · OSHA · USEPA · SCAQMD · GSA

Request data sheet

SafeCare EzSolv

Low-evaporation multipurpose solvent for difficult organic contaminants.

  • Adhesives, resins, polyurethanes, silicones, inks, tar and asphalt
  • Long contact time with minimal evaporation loss (estimated Kauri-Butanol value > 1,000)
  • No chlorinated derivatives or glycol ether; test first on paints and plastics

Not water-miscible. pH 6.9. Flash point: 177 °C.

Certifications and references: OSHA · USEPA 600 / 601 / 602 · GSA SIN 375-362 / 375-363 · US DOT Class 55

Request data sheet

OSHA, USEPA, GSA, USDA, NSF and SCAQMD references belong to US regulatory frameworks; no equivalence with Spanish or EU regulations has been confirmed.

Sectors

We work in environments where cleaning is subject to safety, environmental and traceability requirements.

RailRolling stock, workshops and stations.
Marine and navalShips, shipyards and marinas.
AerospaceAircraft maintenance and hangars.
Oil & GasIndustrial facilities and equipment.
Urban servicesCleaning contractors and city councils.

Company

UMP is the trading brand of Amrep Europe S.L., based in Santander (Cantabria, Spain). We develop and distribute plant-based cleaning solutions for industrial customers in Spain and Europe.

Our approach is technical: we document what the product does in the container and what happens to the waste after use, so customers can calculate the total cost of the service and not just the price per litre.

Contact

Tell us your surface, contaminant and sector and we will reply with the right data sheet and quotation.

Email
ump@ump-spain.com
Phone
639 603 304
Address
C/ Inés Diego del Noval 59, nº 6, 39012 Santander (Cantabria)
Write by email